Mounting

T Generally, the Micro sights are delivered with an integrated standard mount, and in this case the sight is ready to be mounted on the weapon rail. In case the standard mount is not already attached to the sight, then the following applies:

• For Micro H-1/T-1: Use thread sealer (ex. Loctite) on the 4 screws of the mount when tightening the mount to the sight.
• For Micro H-2/T-2: DO NOT USE ANY thread sealer on the 4 screws of the mount when tightening the mount to the sight. Micro H-2 and T-2 sights utilize a Helicoil attachment that may be damaged by use of thread sealers.

For detailed information about the mounting procedure, please read chapter V in the user’s manuals of the Micro H-1/T-1 and Micro H-2/T-2 sights.

Aimpoint® sights can be mounted on virtually any firearm. For models which do not have an incorporated mount, you will need 1 or 2 rings to mounting optic on the weapon. Depending on sight model, these rings will have a diameter of 30 mm or 34 mm. We recommend a gunsmith to mount the sight on the weapon to ensure correct alignment. If not mounted properly, you may experience zeroing problems.

Only products currently manufactured or older 7000 series Aimpoint® sights should be mounted on this type of airgun.